HEI Upgrade but No Spark (kinda)

67Dart273 said
You are leaving something out and jumping ahead. OP did not indicate that he "hot wired" the thing unless I missed it, and further, did not indicate he tested the cranking/ bypass circuit. REMEMBER IGN1 "run" goes dead WHEN CRANKING If ign2 is not connected, you will not have spark during cranking

I have voltage to the coil with the key in the run position but haven't confirmed voltage while cranking. I haven't bypassed anything yet and yes I have grounded the GM module and I am using the GM heatsink. I am currently out of town but I appreciate the possible fixes.