Trick Flow small block heads
I am just posting this from the IMM Facebook page. I thought it would be a good reference on 67dodgedartconv's engine. Just another piece of the puzzle
From IMM:
Cranking psi is 175-177 across the board. Cam is custom, but I will say it's only 239@ .050 on the intake side, and only has .584 lift gross. It's hyd. roller. Good luck with your build, the TF heads are definitely producing great results so far!
.506HP @ 5800rpm, and 506TQ @ 4300rpm on that particular pull...thought we might get a little more from the 950HP carb, but not much. With a box stock 750QF carb, it made 503HP and 499TQ.
I am just posting this from the IMM Facebook page. I thought it would be a good reference on 67dodgedartconv's engine. Just another piece of the puzzle
From IMM:
Cranking psi is 175-177 across the board. Cam is custom, but I will say it's only 239@ .050 on the intake side, and only has .584 lift gross. It's hyd. roller. Good luck with your build, the TF heads are definitely producing great results so far!
.506HP @ 5800rpm, and 506TQ @ 4300rpm on that particular pull...thought we might get a little more from the 950HP carb, but not much. With a box stock 750QF carb, it made 503HP and 499TQ.