63 Dart bezels and 3D printing?

63DropTop said
That is awesome! Thanks for confirming I'm not Bat $hit crazy for pursuing this. I love the kick panels, I was leaning towards similar custom door panels but if you have "production" pieces I'd be interested in buying a set from you and move onto next piece. I was soooo focused on the really expensive reproduction parts that I didn't even think about glove box, nice going! I'd be interested in one of those also if your selling them. What material are you using?
Thanks again for sharing, this thread has been very inspiring.

last question first. On the kick panels (and glove box if it ever comes out right)I'm using haircell ABS. on the Side and top rear convertible panel pieces I'm using HIP plastics just a bit thicker than original. on the side glass divider cushions for convertibles I'm using 90 Dureometer rubber. and yep I'll be doing both the hardtops and convertibles soon.

the kick panels are 115.00 shipped to the lower 48 if your interested they come with the panels (2), #8 trim screws (4), #10 trim screws (4) and a speaker dimension sheet for reference on how deep you can go. 1 item to consider is unless your dimmer switch is at least 3.5 inches away from the sidewall you will have to relocate the dimmer switch out a bit. (I have mine set at 4" for an easy hit of the toe.)