I tried moving it around, I even cut the top plastic caution tab off because it was hitting the radiator inlet on the radiator.
After doing this and I thought to myself, what would savvy genius FABO do. Measure distance between radiator, divide by the radius of the fan then multiply that by .618 and use a CNC to cut out the shape it produces and attach it all perfectly... That's to much for the simple minded like me, so I thought again... The savvy but not genius FABO would fab up some resin reinforced closure of the shroud and tabs to attach perfectly.
Realized quickly I'm to dumb for that so I'll grab some zip ties and duck tape and put it over the door handles because I'm not smart enough to own or drive this car.
Edit- forgot to mention I measured the distance between the bottom and top tabs on the shroud which were roughly 14in and the tabs on the radiator tabs measured around 13in of distance