Holley/Demon Carb stumble
The good 3310 blocks you have are .033 or .035 right?
And I thought this starting point was for a carb with similar throttles and venturis.
.031, .033, .035 are all pretty typical IFR.
.053 is way out of line IMO
For four corner idle, and the transfer slots are about the same lengths, I would think square is a good starting point.
The good 3310 blocks you have are .033 or .035 right?
And I thought this starting point was for a carb with similar throttles and venturis.
.031, .033, .035 are all pretty typical IFR.
.053 is way out of line IMO