Dartin for Divorce

So I'm sitting here looking at my fan clutch, I think the mounting flange may be to long, unless i can bolt the fan to the clutch instead of on the waterpump, but unfortunately I do not think I can. I have looked over some previous threads where people had to move the radiator forward or take the radiator out to install the fan clutch. I have also looked at other fan clutches and it looks like there is a fan clutch with a shorter mounting flange for over sized radiators, if I can't get this one to work I could always try to get one of those and see if it would work.

Edit: Just did some measuring - Currently I have 1.5in between my fan and my radiator, I have 2.5- 2.5/8in from my radiator to where the fan mounts on the water pump (without the pulley on, so it will be closer to the radiator when I put the pulley over the water pump; it will push the fan closer to the radiator by about 1/8in). My fan clutch total depth measuring from the edge of the mounting flange to the edge of the clutch is roughly 3 5/8in, which is to big. I will look for a smaller one, which I may have found one on rock auto.