I’ll say NO to the resounding exclamation and excitement of others. Here is why, build your engine, dyno it, if it lacks HP up top, the next size cam is what you need to achieve your goal. Not enough torque down low? The next smaller cam is what you need.
Unless you have more information that needed about your engine vs a rocket launch to the moon, any choice you make will more than likely be a good one. However to maximize the engine, start with the cylinder heads port flow balance and work on the cams lobes to get the most on what your endeavoring to achieve.
I would start with a top of the line computer sim that has more parameters than simple head flow numbers. Tighten up your belt, it’s going to be a heck of a learning curve and your information list is going to get long.