Dad’s 1969 Dodge Dart Swinger 340
Havent been idle... just busy. I finished stripping the door (using a DA, die grinder with sanding disc, Dremel-type tool with tiny sanding drum, and sand paper). on Monday night, the boy came over to put some epoxy primer on it. He's getting better at this spraying thing. I also sprayed some... recoated the quarter after I sanded through in some (many) spots. I went up and over the top edge towards the trunk. I had some pretty rough pitting there, so I had to blast it first. I nearly cut it out and welded in new metal... that would really have been dumb. Not pictured are the repairs (for rust) I had to make to the passenger side seam where the quarter panel, deck filler panel, and trunk gutters meet. It went well.
Havent been idle... just busy. I finished stripping the door (using a DA, die grinder with sanding disc, Dremel-type tool with tiny sanding drum, and sand paper). on Monday night, the boy came over to put some epoxy primer on it. He's getting better at this spraying thing. I also sprayed some... recoated the quarter after I sanded through in some (many) spots. I went up and over the top edge towards the trunk. I had some pretty rough pitting there, so I had to blast it first. I nearly cut it out and welded in new metal... that would really have been dumb. Not pictured are the repairs (for rust) I had to make to the passenger side seam where the quarter panel, deck filler panel, and trunk gutters meet. It went well.
