Rims in Question

-

greyghost340

GreyGhost 340
Joined
Dec 5, 2014
Messages
307
Reaction score
89
Location
New Balimore MI
Can anyone tell me what these rims belong on? Possible early Cuda?

Cuda Rims.JPG
 
My favorite aftermarket wheel of all time!

Be aware they take special lug nuts- hybrid shank and cone seat.
 
Last edited:
There's a ebay seller for $85 plus shipping.

...or you can machine down some ET nuts that have the same profile but a longer shank.
(note that you are removing the protective chrome plating from the end that contacts the drum/hub)
 
Those look like Motor Wheel Spyders. Aftermarket from back in the day. I've seen nice examples with pretty hefty price tags. Size, lug pattern, backspace will tell you what they'll fit.
https://www.hemmings.com/blog/article/motor-wheels-spyder/
There's a ebay seller for $85 plus shipping.

...or you can machine down some ET nuts that have the same profile but a longer shank.
(note that you are removing the protective chrome plating from the end that contacts the drum/hub)
Thank you every one who responded. I am new and have received nothing but support, learning a lot. I appreciate all the support and feedback. Even the little jokes that roll in! :thankyou:
 
I have a set of 14x6.

I'm looking for a pair of 15x7.
 
The ones pictured look like large bolt pattern. Did they make small bolt ones?
 
The ones pictured look like large bolt pattern. Did they make small bolt ones?

From the Hemmings article: "A variety of diameters (14- or 15-inch), widths (up to 8 inches wide) and lug spacings (GM, Ford/Studebaker, drum-brake A-body Mopar) were available..."
It looks as if they were available in small bolt pattern, but I've never seen them.
 
-
Back
Top