Longtime Lurker, first time posting!

Complete vehicle specifications:
73 Space Duster
All steel except for lift off hood and fiberglass front bumper 3280 pounds
manual Wilwood 4 wheel disc brakes
manual steering
stock width A-body 8-3/4, 35 spline Strange axles and spool Stock 3.23 gears 489 case
Cal-Trac split mono leaf springs and traction bars
mini tubed with 315-60-15 Mickey ET Streets rear Mickey LT fronts on Weld Super Lites
Optima red top battery in the trunk
welded in tubing for frame connectors
chromemoly cage
QA1 tubular k member
QA1 tubular lower control arms
Stock upper control arms
Stock dash, stock column
Jaz drivers seat
factory passenger bucket seat
5 point drives harness
4 point passenger harness
no rear seat (yet)
ECP 26” radiator AL with 2 1” rows
B&M trans cooler
Cyclone 16” electric fan
318 Magnum stock not rebuilt 150k engine, stock cracked iron heads
Comp shelf cam 20-746-9 hydraulic roller
Hughes 1110 valve springs
double roller timing chain
factory tensioner
Cometic head gaskets
ARP head studs
stock serpentine drive with tensioner relocated to drivers side head
kegger intake with 1/4” plate welded to bottom, EGR divider removed plate made for idle air solenoid mounted to EGR pad
Ferd IAS
lean burn distributor for locked timing
MSD 6-AL for spark with Mallory coil
stock Magnum alternator and AC compressor
Turbo Spark solid state adjustable voltage regulator
VS Racing GT45 turbo
Magnum drivers side exhaust manifold on passenger side, Magnum passenger header on drivers side forward facing
2-1/8” exhaust to T4 turbo flange
3-1/2” to 3” down pipe
Innovative O2 gage and controller
Auto meter gages including boost gage
Siemens 80 lb-hr injectors
AEM 400 LMH external fuel pump
stock tank with 1/2” pick up & 3/8 return
3/8 hard lines supply and return lines
factory rails throttle body and regulator
roll control
A999 with TA trans brake valve body
4500 rpm TA converter
B&M Quarter Stick
multiple time magazine car
most recent was Mopar Action December 2013