V-gate shifter with an A833 OD trans?

The mr gasket version is or was easier to find a boot for. Last I checked the Mr gasket version boot was still made. Notice the reverse shift handle location.

The unobtanium boot is the hurst ram rod version. The ram rods reverse lever is beside the main shift lever.

Oh yes and Mr gaskets version was the first version until Hurst copied it. Eventually Mr gasket bought out Hurst.

Most people dont even realize what the shifter is and assume automatic lol

Now that I have that out of the way.

I run the hurst ramrod shifter with my overdrive 4 speed in my 67 dart. Originally ran it with 3.55s and regular 4 sp.
Switched to 4.30 with the 4 sp overdrive.

I had to make my own linkage rod and the overdrive lever. I also made my own mounting bracket as the shifter came from my dads challenger, which he sold in the early 80s.

Also there is no way in hell you will split your shifts on a hard launch with the gear vendors overdrive. Unless your damn good. Think about all the button pushing and shifting.
Ex
1st, button on, button off, second, button on, button off, 3rd, button on, button off, 4th, button on.

I find 1st is short, but when you have a stroker motor the rest of the gears are also short.