Dante's Mopar Parts Vinyl Top

I used to glue laminate onto cabinet material. Used a spray gun and contact adhesive to spray the boar to lay 8X4 pieces of laminate onto particle board. Talk about a one shot deal! We laid 5 foot dowels across the board every foot and then laid the laminate on top. Once we got it straight (many had linear patterns on them that had to be straight with the wood side) we removed the center dowel and pressed the center down to hold the panel straight, then we removed one dowel at a time moving outboard and pressing the laminate onto the wood. That way we could control the laminate and make sure there were no bubbles. We would then vigorously roll it to make sure all the laminate was bonded. That stuff would not come up.