Cam intake closing importance
what lift are you using on the Advertized
Thanks WR
I didn't even get into lift, on the study-cam, cuz it was just an exercise.
I was thinking you might pop in
The 284/284 cam, I'm guessing has two same pattern lobes on it, and moving it from straight up 0* advance only serves two purposes;
1) it trades compression duration for power duration,or vice-versa, which in this case is only 212* total, so there is not a lotta wiggle-room,maybe 6*,right; but
2) When you move it from straight up, the effective overlap instantly shrinks, which in my thinking is very bad.