dart 67 convertible

Post a wanted add for 67 GT rocker molding. And use some of my photos.

I had a time trying to find a good driver's side but within 2 years I did.

If you know if a shop that can extrude metal like a continuous rain gutter you could have custom dies made. The trim is aluminium, and a relatively easy profile. The ends are cut at an angle and then rolled over. You might be able to have the profile milled out of flat stock with the back side relieved and attach with weatherstrip adhesive like modern trim is.

I looked at all these options ( even thought about 3D printing) but for me in the states they were cost prohibitive, you in Sweden some of those options might be cheaper than just the shipping costs.

All the trim is out there you just have to be patient. There were only about 3750 67 dart convertibles made. Of that I estimate about 1/2 still exist and of that a handful are being parted out or de chromed.

Luckly the 67 GT moldings are not convertible specific so there are many more potential doners. And lots of 67 darts have been dechromed.

Looking forward to the photos.