Dixco Hood Tach Wiring Help
So I confirmed this:
The gray wire is attached to negative side of coil. So it must pair with the green. See photo of dixco box below.
Black “should” be ground. So black to black.
My issue is the second Red. Box says “switched 12 volts” which is Greek to me.
So I confirmed this:
The gray wire is attached to negative side of coil. So it must pair with the green. See photo of dixco box below.
Black “should” be ground. So black to black.
My issue is the second Red. Box says “switched 12 volts” which is Greek to me.