[Found!] 318 /340 valve cover

-
Status
Not open for further replies.

couper 340

FABO Gold Member
FABO Gold Member
Joined
Jul 26, 2012
Messages
276
Reaction score
129
Location
maryland
Rating - 100%
7   0   0
Contact seller
Need the valve cover with the oil filler cap on it and has two metal tabs for spark plug wires.
Must not have pin holes in it as i already have a bunch of those. Please pm me if you have one or both sides .

Resized_20200104_202814.jpeg
 
Your Idear of fair and mine may not be the same let me know $30.00 plus shipping .and do you do pay pal or can send check if your ok with price.
 
Shipping was $26.10. I thought it was a little steep but they are on the way. Post office you should have on Monday. Tracking number is 9534613639840007532134. I am in need of a fuel and temp gauge voltage limiter and the little harness that goes to them. If you have I would be willing to swap for valve covers and shipping. Let me know
 
Bill sorry have dash wiring but its for a 1969 or 70 and not sure if it use the voltage limiter. let me know your pay pal and i will send you
$60.00 Thank you . joe Bill will take a picture of the wire tomorrow . i got them and there were not for my rally dash so could not use it . if you cam use i will just send it to you .
 
Last edited:
I have a 70 swinger 340 with rallye dash. There wasn't a voltage limiter on it when I took it apart but was told it needed one. Didn't see any thing plugged into the back of those gauges. I am an old Chevy guy so some of this stuff is greek to me. I know those gauges didn't work when I first got car. Should be able to just use my email. oldtin1936@yahoo.com $50.00 total is fair to me, shipping was way too much.
 
I know our 67 cuda has whats called "rallye dash" it is a standard dash for the.barracuda. The voltage regulators are located inside the fuel gauge. Called IVR (internal voltage regulator. Duster/darts/demons I believe had an optional rallye dash. The standard dash for them had a rectangular plug in on the back of circuit board. Hope it makes sense...and hope I'm right lol
I have a 70 swinger 340 with rallye dash. There wasn't a voltage limiter on it when I took it apart but was told it needed one. Didn't see any thing plugged into the back of those gauges. I am an old Chevy guy so some of this stuff is greek to me. I know those gauges didn't work when I first got car. Should be able to just use my email. oldtin1936@yahoo.com $50.00 total is fair to me, shipping was way too much.
 
Mine has the round plug where harness plugs into printed circuit, but temp and fuel gauge are isolated from the others. My car had set for many years before I bought it and I just got it running then loaded it on trailer and headed south for winter. Been working on it steady but still haven't driven it yet. Hope to have it in paint in a week or so, then will get back to the dash.
 
Yep rally dash.
Mine has the round plug where harness plugs into printed circuit, but temp and fuel gauge are isolated from the others. My car had set for many years before I bought it and I just got it running then loaded it on trailer and headed south for winter. Been working on it steady but still haven't driven it yet. Hope to have it in paint in a week or so, then will get back to the dash.

20191129_222034.jpg
 
So gauges should be safe and just plug it back in the way it was. Good to know. Looking forward to working on the inside of car, hate body work.
 
If dash is out thoroughly check it over. You can use a 6v lantern battery for power. Waayyy easier to check/fix while its out on a bench.
Lol, I wish I knew how to do body work. Have fun!
So gauges should be safe and just plug it back in the way it was. Good to know. Looking forward to working on the inside of car, hate body work.
 
Oh yah. Didn't say I was good at it. Takes me three time as long as it should. Thanks for the info on gauges. Will do the 6 volt battery test. Don't want to have to take apart again.
 
I have a 70 swinger 340 with rallye dash. There wasn't a voltage limiter on it when I took it apart but was told it needed one. Didn't see any thing plugged into the back of those gauges. I am an old Chevy guy so some of this stuff is greek to me. I know those gauges didn't work when I first got car. Should be able to just use my email. oldtin1936@yahoo.com $50.00 total is fair to me, shipping was way too much.
sent you $55.00 by paypal . here is picture of dash wire if you can use let me know.
Resized_20200108_161139.jpeg
Resized_20200108_161145.jpeg
Resized_20200108_161155.jpeg
 
Thanks, think I have the gauge question figured out so won't need harness. Thanks again. Sorry about the dust on valve covers, getting my car ready for paint.
 
Status
Not open for further replies.
-
Back
Top