Tame my 4-speed Stroker....

Ok a quick search and I found some part numbers. Can't link them because I too stoopid o do it with this iPad.

So McLeod has a 10.5 disc that has a sprung hub and organic lining. Part number is 260320.

They also have a 10.5 disc that has an unsprung hub and organic lining. Part number 260720.

I also noticed they are making (again which is very cool) a Borg&Beck/Long cover that takes a 10.95 disc on a stock flywheel bolt pattern

The cool thing about this cover is it fits on a stock Chrysler flywheel AND it uses Long fingers which has a quicker release and makes shifting much easier.

It is a 12 spring cover and it comes at 2400 pounds of pressure. You can run the cover with as few as 6 springs, but with a rag disc, you can probably just pull 3 springs, dropping 100-125 pounds of plate pressure and make the chassis even happier, even with the CT.

The part number is 360951 for the plate with counterweight and 360952 without counterweight. The non counterweight one is the best option.

The good thing is if you ever wanted to make the move to a sintered iron disc, you can send that plate to Cale Aronson and he has some pretty trick levers for it and he can make it adjustable.

Very cool.