69 Dart wiper motor for ram charger air cleaner

-
BadBee

BadBee

'69 Dart 440/6/4 speed
Joined
Aug 16, 2015
Messages
233
Reaction score
60
Location
Mass.
Hello All,
What size? What year ? Wiper motor is needed in a 69 Dart /440/6 pack to accomadte the air cleaner-ramcharger air cleaner? I’ve already purchased the smaller blower motor to accommodate the Mopar black finned valve covers. A thanks in Advance HAPPY AND SAFE NEW YEARS TO ALL A PICTURE IF YOU HAVE ONE PLEASE
MITCH
 
A three speed wiper motor which is almost right angle to the fire wall. Problem is there getting as rare as hens teeth and just as expensive. Best bet is to look for that year and you will also need the linkage.
 
have a bunch of 70 and 71 duster 3 spd motors

steve 247.jpg


DSCN1590.JPG


44420[1].jpg
 
Three speed still hits, most likely (depends on a lot of factors, including air cleaner height). We made lots of room on my son's Dart by using an early A-body wiper motor. They were mounted in the passenger compartment. I haven't installed the wiper motor in my Barracuda yet so I don't know exactly what clearance issues I might have.
 
I have a 3 speed wiper on a 71 Cuda and it sticks out about 3" from the fire wall. Hope this helps.
 
The neck is cut short for hood clearance and the air cleaner does hit the motor (it cut a small groove in it), but did not cause an issue.
Old Dart 01.jpg
 
BadBee said:
Hello All,
What size? What year ? Wiper motor is needed in a 69 Dart /440/6 pack to accomadte the air cleaner-ramcharger air cleaner? I’ve already purchased the smaller blower motor to accommodate the Mopar black finned valve covers. A thanks in Advance HAPPY AND SAFE NEW YEARS TO ALL A PICTURE IF YOU HAVE ONE PLEASE
MITCH
Click to expand...
Do you have the part # for the smaller blower motor?
 
Jim Lusk said:
The neck is cut short for hood clearance and the air cleaner does hit the motor (it cut a small groove in it), but did not cause an issue.View attachment 1715454186
Click to expand...
Hi Jim
I looked in my old notes and yours and my discussions in the past. I know Mike Schumacher has the same set up. I’m familiar with the three speed motor having had several 69 b bodies. Super Bee/RR He has a 440/6 pack as well but I have a excellent original Air cleaner mint. If customizing is involved I’d rather use a reliable pop
 
Jim Lusk said:
The neck is cut short for hood clearance and the air cleaner does hit the motor (it cut a small groove in it), but did not cause an issue.View attachment 1715454186
Click to expand...
Hi Jim
I looked in my old notes and yours and my discussions in the past. I know Mike Schumacher has the same set up. I’m familiar with the three speed motor having had several 69 b bodies. Super Bee/RR He has a 440/6 pack as well but I have a excellent original Air cleaner mint. If customizing is involved I’d rather use a reliable pop
 
You must log in or register to reply here.
-

Back
Top