Hydraulic FT issues/rumors?

EDIT: Maybe I should mention that I tried to increase the oiling to my top end, in an effort to keep those valve springs cool. That top end is now spraying oil everywhere. I took advantage of that by drilling out the little pockets between each pair of lifters. Now some/most of that oil is draining into the cam tunnel. My hope was that some of it would flood the cam and then I would have no more flatted cams. And since 2004/5, I think I got it licked. With the HV pump, there seems to be lots of oil moving around. I also cut some drain-back channels in my Eddies at the back to improve drainage. I now have left and right heads. I had to go quite deep to make them half-decent effective.