massive reconfiguration time again.

Okay first thing I did when I started today I took the choke are doors completely off. They were just locked wide-open anyways and the little arm that reaches over to activate it covers one of the step-down spring covers and I have to take the little clip and arm on and off every time anyways. I threw the heaviest Springs in there and hook up a new wideband O2 sensor. It seems to be running a little bit leaner with the new O2 sensor. I moved the pump shot arms back to the middle..
with that done I observe something on the pressure of the gas that I hadn't seen before because the air doors were in the way. A big crap load of gas is crawling up out of the carburetor on the front wall in the primaries where the pump squared is??.. I'm wondering if I can go back to the 31 squirters and see what happens. In my mind that's where I want to go next. Also going to the Green Springs from Factory. This will put it back at a factory setting and maybe start the process over again...
Also this is being done with the air filters off so that could be having something to do with disturbing the airflow I'm not sure...