Another turn signal problem.

The way you worded this I'm going to say "no."

First once again it depends on the column and the type of switch. If the column is set up for integrated brake lights, the brake light switch output feeds into the turn signal switch

If the switch is NOT set up, and rather, uses separate stop only lamps, then the brake switch output must go to the rear, branch off, and feed to dedicated stop lamps

"Kinda" the first thing you need is to de-mystify that switch. Mopar, Ferd, and GM used "somewhat" standard wiring colors over the years. If you can start there---assuming you have a connector pigtail, that will be a start.

Worst case..........If you want to pull the switch and send it up here, I can figure it out for you