Setup for 750DP on this 408

Here's what's in the 408:

· HP & Torque: 445 HP / 500 FT LBS
Compression Ratio: 10.1:1
Aluminum Heads: Eddy RPM's
Flat Tappet Cam
Forged Pistons

Block:


Cylinders honed on computer controlled machine to within .0002 straightness and roundness

4.000" Bored .040" over

Rotating Assembly:

· New Cast steel crankshaft
4.000" Stroke
OEM type 6.123" connecting rods w/ 150,000 psi bolts
Forged pistons
External

Cylinder Heads:

· Aluminum Cylinder Heads - 63cc chamber
2.02" intake/1.60" exhaust valves
171cc intake/77cc exhaust runners

Cam Specs:

· Cam Type: Flat Tappet
.545 Intake .545 Exhaust
241 Intake / 247 Exhaust duration
@ .050 - 110 degree lobe separation

Ignition Timing:

· 34 degrees total at 2500-3000 RPM


I need to know how to set up the jets, the power vavles, whether or not to put 50cc acc pumps on it, which cams, anything else that would prove helpful as a starting place to run it at.