PRNDL lense

IIRC, the column has to be disassembled, and the lens can be removed once the shift collar is removed. If you have a service manual, it should illustrate the procedure, I don't have one, but I believe they are available online. Basically remove the steering wheel, turn signal switch, lock plate, ignition switch, that should get you to the shift collar IIRC, and removal is fairly straightforward. Long time since I did one, but not overly difficult with some basic tools. May need to remove the column, might make it easier to work on a bench, have to lower it at least. There is a recent post detailing much of the process, I think it was to replace an ignition switch.