Show your 5x4 small bolt pattern wheels!

-
Lets see those small bolt pattern wheels!
Factory 14x5.5 SBP wheels x4. With 195-70R14 on the front, 215-70R14 on rear.
0-1.jpeg


0.jpeg


0-2.jpeg
 
DSCF5751Small_zps4fa846de.jpg


DSCF5753Small_zpsb4045e12.jpg


DSCF6092_zpsvd6wdwrj.jpg



alloys are 14 inch (sold them) Rallies are 15 inch.
 
14x7 chrome.

Dog dish or not?

Too bad there is rust in the centers.
I took the worst one and polished it with some chrome stuff. Took off most of the rust barnacles, but the one edge where the cap snaps on is bad.
Going to soak them with Evaporust.

20200306_164952.jpg


20200306_233007.jpg


20200306_232941.jpg
 
Hey Richard, yeah it's me. The weather is finally starting to break towards spring! Can't wait to get the Swinger out, I bet you are the same. Hope to see you soon. George

George, weather appears to be breaking in NW Oh, temps in the 60s recently. Actually had the Darts out and took a spin in early January, before the snow/salt appeared. Getting anxious to get them out. First shows only a month or two away! We will have to coordinate with Frank.

Richard
 
Those are cool. How much?
Probably keeping those I imagine, do you know the maker?
I had a line on another two, we working on a deal and he went missing.
Not sure what I am doing with them, like to find two more. They are old I will see if there is a name on them.
 
By any chance can you share who made your wheel in 4 1/8 backspace? Cuz I contacted eheel vintiques and said they had to set wheel outer barrel reverse to get any more than 4.25 backspace. However, doing this no longer able to use trim rings!:(
Specialty wheels made them for me but coker tire bought specialty wheels and they no longer make specialty wheels stuff. You should be ok at 4.25. They do not have to flip the rim. It will be right on the edge.
 
-
Back
Top