AJE suspension coil over conversion kit for a-body

I'm a little familiar with the AJE front end. Being a fan of all suspension set ups, I like to see what is out there.

If you are simply looking to remove the factory bump stop bracket.....removing it is SOP when installing a RMS and a few others. The HDK does not, but only because HDK wants the conversion to as reversible as possible for the H-code and specialty cars..... other than a couple of holes.

I would have them off in a few minutes with a grinder / cut-off wheel. About the only way to hurt anything is actually cutting into the frame rail, but even if you did, nothing a little weld and sander can't make new again.
My question would be....if removed, what are you going to use for a bump stop?

If you called me / HDK, there must have been some confusion. I have sold dozens of assorted front end packages with the motor perches that are normally tigg welded in place, simply zip tied on.....especially with the Gen III Hemi builds, customer placement is often needed.

I thought I read where you were looking for a upper coil over mount........HDK sells their tried and proven (for over two decades) piece ala-cart @ 299 plus shipping.
HDK 67 to 76 A Body Upper Shock Mount Support Hoops

I like to see builders following their own path on how they want to do things....it is Hot Roddin' 101