Finally Some Pictures of my 1969 Dodge Dart GT

1969VADart said
So I finally got some pictures loaded onto my computer so that I could share them with the forum. Going to try to share some basic pics and then show some of the biggest problems I will have to deal with. At least we got the car running, but now I am in the process of replacing everything from the fuel pump back to the fuel tank. The previous owner had let the car sit for far too long. Gas was leaking out of a whole bunch of pin holes in the tank. So I am replacing everything (tank, straps, sending unit, etc.). Then I should be able to get the car on the road. This will probably be a slow process so I am going to make the car at least serviceable to drive in the meantime.

IMG_0108_zpsdb2ccca2.jpg

IMG_0116_zpsc2293be2.jpg

IMG_2504_zpsd4538b02.jpg


318 with 2.02 heads (from a 360), Mopar Performance aluminum intake, Carter 4-barrel carb, Mopar purple cam (don't know specs), Factory AC and Power Steering

IMG_2494_zpse0c0e529.jpg
Some bad rust where the vinyl top split. I plan to ditch the vinyl top all together.

IMG_2501_zpsbf44cbe2.jpg

IMG_2506_zps72270276.jpg
The only really troublesome hole.

IMG_2497_zps78557618.jpg
The worst spot of rust on any fender. Other smaller spots at fender corners, but the rocker panels are intact.

IMG_2508_zps86dc40b1.jpg
Drivers view.

IMG_2510_zpsf699f8bf.jpg
Front seats.

IMG_2512_zpsf1b1d907.jpg
Back seats.

IMG_2513_zpsf82278a0.jpg
Worst door spot inside.
Click to expand...
Good lookin Dart, I’d attend to that rust around the sail panel and roof asap, at least remove the loose stuff and temporarily coat it for the time being. Living up here in the rust belt I know how it can quickly progress. Thanks for posting photos, it’s got great potential!