Rally dash redo

Steve,
Door jambs weren't too difficult at all.
Hold the button from turning while wrenching the switch with a 7/16 open end wrench/spanner.
upload_2020-4-20_17-33-57.png

Then disconnect
upload_2020-4-20_17-35-35.png
Fishing it back in will be a little challange.

I found removing the connectors from the hand brake and regular brake was a much bigger pain. For the last one in the cable (white wire), I found a flat head screw driver (small pry bar) gently on the connector worked.
upload_2020-4-20_17-41-47.png


White one connects on the far side of that bracket. No room to get a grip on it.
upload_2020-4-20_17-47-32.png

I'll say most of the electric has not required laying on the back.
Cleaning and re-gluing the insulation to the dash is the one thing that has required a bunch of time on my back.