What camshaft should I use?

Here is the dead giveaway if it is an exhaust lobe. Remove the air cleaner. Start the engine. Drop it in drive (I assume auto). Hold the brake firm. Load the engine up against the converter. If you get a rhythmic POP out of the carburetor, you have "something" holding the exhaust valve closed. Whether it's a wiped lobe, bent pushrod, broken rocker......or "whatever".

Pushrods are good. I took them out and cleaned them, they were all straight. I also cleaned the rocker assembly. A soaking in kerosene and scrubbing got a lot of grime off of them.

Everything was reassembled and torqued to 30 ft.lbs. evenly.