Les Gibson said

Concerning the alternator output wire, I'm running a one wire alternator in my drag car. There is no factory wiring at all, meaning there is no alternator 'field wire' as shown in the diagrams. What I had done previously was to run the alternator output, via a number 6 wire, directly to the battery side of the kill switch. The problem with this setup is that even with the kill switch pulled, this wire is still hot. My question is given that I have no factory wiring, where on this diagram would my alternator output wire connector in order for the kill switch to function properly, and by properly meaning that ALL power is cut off when the kill switch is pulled.

Click to expand...