15x10 WHEELS ON A BARRACUDA
So why do they use the same AMD inner and outer wheel houses then? Duster has wider lip on the wheel opening on the quarter, but that doesn't make a lick of difference for clearing the tire if it's inside the wheel house.
AJ/FormS's Barracuda measures within a 1/4" of my Duster inner to outer wheel house, that's factory tolerances.
What is the backspace on the 17x7's? What are you running in the back for a rear axle? 8 3/4 with BBP axles? Stock spring locations? Makes a pretty big difference.
In the front with a 17x7" a 215/50/17 would be your best bet, it's 25.5" tall. About the widest you'll be able to do is a 225/45/17, but that will still depend on the backspacing and that's only a 25" tall tire. Maybe a 225/50/17, but with the Barracuda front wheel opening you have to modify the lower front corner of the fender when you get close to 26" tall on the tire. 235/45/17's are supposed to be mounted on 7.5" wide rims or better.
What are your plans for the car? What tires do you want to run?
So why do they use the same AMD inner and outer wheel houses then? Duster has wider lip on the wheel opening on the quarter, but that doesn't make a lick of difference for clearing the tire if it's inside the wheel house.
AJ/FormS's Barracuda measures within a 1/4" of my Duster inner to outer wheel house, that's factory tolerances.
What is the backspace on the 17x7's? What are you running in the back for a rear axle? 8 3/4 with BBP axles? Stock spring locations? Makes a pretty big difference.
In the front with a 17x7" a 215/50/17 would be your best bet, it's 25.5" tall. About the widest you'll be able to do is a 225/45/17, but that will still depend on the backspacing and that's only a 25" tall tire. Maybe a 225/50/17, but with the Barracuda front wheel opening you have to modify the lower front corner of the fender when you get close to 26" tall on the tire. 235/45/17's are supposed to be mounted on 7.5" wide rims or better.
What are your plans for the car? What tires do you want to run?