68 Barracuda shoulder strap question
CudaLou ,
Look for this thread i screen shot below. I bought these for my 67 and my sons 69. Both barracuda notches. On the 67, or early build 68, use the coat hook hole. It's just about where the shoulder belt anchor is on a late 68 and on a 69 as far as a notchback goes. This thread also has the belts I used and who I got them from as well as how to make the secondary lower anchor and where to put it to maximize its strength. Not sure how to link that thread, but use the search engine and you will find it. I have anchors off different cars that I saved if interested. I think I ended up paying $210 out the door shipped for the front belts with chrome lift latch, and a pair of 60" rear lap belts with the same chrome lift latches. The shoulder belts have a retractor, and an 8" sash with a D ring to put the belt at about shoulder height and not cut into your neck.
Hope this helps
Matt
CudaLou ,
Look for this thread i screen shot below. I bought these for my 67 and my sons 69. Both barracuda notches. On the 67, or early build 68, use the coat hook hole. It's just about where the shoulder belt anchor is on a late 68 and on a 69 as far as a notchback goes. This thread also has the belts I used and who I got them from as well as how to make the secondary lower anchor and where to put it to maximize its strength. Not sure how to link that thread, but use the search engine and you will find it. I have anchors off different cars that I saved if interested. I think I ended up paying $210 out the door shipped for the front belts with chrome lift latch, and a pair of 60" rear lap belts with the same chrome lift latches. The shoulder belts have a retractor, and an 8" sash with a D ring to put the belt at about shoulder height and not cut into your neck.
Hope this helps
Matt