73 Dart Sport Reanimation
I installed a 1/2" pick up in the gas tank, and ran #8 braided line down the passenger side sub frame connector and a # 6 line for return off the nitrous regulator. I used nutserts in the frame connectors so I could secure the fuel lines and battery cable with rubber lined added clamps. I used a Holley blue fuel pump mounted on the underside inner frame rail. I also installed a large inline fuel filter along the frame connector. On the rear passenger side inner fender I made a aluminium place to mount the regulators and solenoids for nitrous. I used a dedicated regulator for the nitrous and separate one for the carburetor. The NOS brand is a basic cheater kit that picked up at the spring fling at Woodly Park last year. I also picked up a fogger kit from the same guy that I hope to use when I build a stroke motor with some good heads.
I installed a 1/2" pick up in the gas tank, and ran #8 braided line down the passenger side sub frame connector and a # 6 line for return off the nitrous regulator. I used nutserts in the frame connectors so I could secure the fuel lines and battery cable with rubber lined added clamps. I used a Holley blue fuel pump mounted on the underside inner frame rail. I also installed a large inline fuel filter along the frame connector. On the rear passenger side inner fender I made a aluminium place to mount the regulators and solenoids for nitrous. I used a dedicated regulator for the nitrous and separate one for the carburetor. The NOS brand is a basic cheater kit that picked up at the spring fling at Woodly Park last year. I also picked up a fogger kit from the same guy that I hope to use when I build a stroke motor with some good heads.