Hotchkis TVS with QA1 lower control arms

matthon said

Is the LCA part # QA1 52307?

Can you use the stock strut rods?

I have a 67 Barracuda, KH brakes, factory sway bar, sbp, suspension was rebuilt but LCA lower bushings and sway bar bushings were not done, but I have them, as well as new offset UCA bushings.

Thinking of just getting new UCAs, QA1 52303, new lowers, and the Hotchkis sway bar, surely it can be ordered separately.

I want to keep the KH brakes.

Click to expand...

Yes those are the lowers I used. The stock strut rod should work fine but make sure the bushings are good. I took mine apart and one of the bushings was shot (maybe go Poly if you can). Those upper arms from QA1 look really good just make sure to get the small ball joint ones. I would also reccomend getting the front and rear bars from Hotchkiss or Helwig. The cars balance will be better with the matched set. PM me if you want more info. I am happy to help.