Lower control arm pin/bushing install
I just did this last night. I used a ball joint press works great. The only thing is make sure you put the pin in the bushing first. Because the ball joint press isn't long enough to seat the pin with the control arm attached. I made it work I use a wrench and a piece of scrap steel it worked but its easier with the pin already in the bushing.
I just did this last night. I used a ball joint press works great. The only thing is make sure you put the pin in the bushing first. Because the ball joint press isn't long enough to seat the pin with the control arm attached. I made it work I use a wrench and a piece of scrap steel it worked but its easier with the pin already in the bushing.
