True HEI distributor conversion thoughts

Prorac1,

I have that HEI in my 73 Dart Schwinger. Works as described and for the $$$ its a good value. Mine sets right by the wiper motor but does fit. I had to clock it some when installing one plug wire from each side, after they are in you are home free to rotate it and adj timing. I have a some shots of my engine in the Show off your Small Block thread. I added some MSD Super Conductor plug wires and the throttle is very snappy so to speak. Would I like a MSD programmable dizzy, yes but some $$$ concessions were taken with the dizzy and the big $$$ is in the long block for now, along with the FiTech.

FYI,
Marion
Good morning. I was wondering if you could tell me exactly how you wired the power wire to the distributor. Maybe a pic or 2. I have the same set up but but can’t find a lot of info on wiring. Everyone says just take the two wires off of ballast resistor and put them together the pigtail to distributor with tach. Problem is, the previous owner had wired in a Gm module and I’m not sure he bypassed ballast resistor. Lots of wire but not sure how they go. Appreciate any help with this. I have a 72 dart swinger with 360.
Thanks