408 Cam on the way

yellow rose said
You have a 23 cc dish, but I’m not sure I trust that 100%. When you do the down fill, its .500 down form TDC, you don’t add in the dome or quench pad.

Did you figure you compression ratio yet?

I put a screen shot of the compression calculator in post 102. How I did the CC accounting for the step and dish is in post 115.
A 0.070 gasket puts it at 9.5.

lead69 said
Just curious if you checked piston rock?
Piston rocking in bore VS deck height / compression ratio - Don Terrill’s Speed-Talk

All my numbers are the averages taken from rocking the pistons. Thanks for asking.