ProComp/Speedmaster aluminum heads

318willrun said

you need a lego car..... something you can tare down and build again twice a week :rolleyes:

Click to expand...

It pretty much is.. almost all of the wiring unplugged and I'll probably be redoing some of that as well making sure it all plugs in and unplugs.. both of the nitrous plugs unplugged. The coil unplugged, the distributor unplugged, the fuel pump wires unplug, the fan wires unplugged, and the 12 volt feed for the electric choke unplugged which I don't use...
Once I took the fuel line off and the throttle cable I just disconnected the four tubes for the nitrous and the entire top came off...
I'll be making some improvements on the way back together. It looks like I could use a new router and cap I don't think about some new wires as well... I'm considering a new timing chain but I don't want to take that damn cover off... It seems like I was getting a bit of a turn on the main pulley and it wasn't moving the cam or the distributor...