Missing copper crush washer high pressure line.

-

MOA

Well-Known Member
Joined
Feb 23, 2016
Messages
350
Reaction score
158
Location
CA
Anybody know where I can find the crush washer, brass/ copper.

????

Goes between the male to male fitting.
15905305594071587169463323605641.jpg
 
.........And after you find one, it is likely way too hard. Been posted before, anneal it. Search that if you don't know how. You need a propane torch, or a gas /LP range
 
I've been to a few places. There is an ace in town, I'll try there.

The place that did the rebuild said they wouldn't sell me one. Part of a kit.

400 spent there. Stage 2 rebuild. I think I'll use somebody else next time.
 
Last edited:
Ace had these, copper rivets.

15905959623199067332083684779003.jpg


Auto parts store didn't have it, hydraulic supply didn't have it, ace did, go figure.
 
Looks like I got it wrong. The washer is much bigger than I thought. Goes here...
15905983127672682218523466844880.jpg


Not here...

15905983626017683926722086351008.jpg


I have a brass one that needs to be drilled out to .5".

I guess.
 
You can buy a assortment of those from parts stores, or Amazon... allways handy to have around
 
Thanks for the help. Got it installed.

All that's left is install front anti sway bar, install Trans cross member, adjust gear selector, fluids, battery, fire it up....

Only took 5 years.
 
-
Back
Top