1968 Barracuda Notch - Plano, TX
Making more brackets. Worked yesterday, but was able to get some car time after dinner. Made a drier bracket, made the two bottom brackets for the condenser. Eliminated the nut for the upper bracket and replaced it with a nutsert into the radiator support. Added nutserts for the bottom brackets to bolt to. Next will be brackets for the oil cooler.
Drier bracket:
Lower bracket on passenger side, put nutsert into frame end cap:
Drier mounted, has a little bit of clearance between it and the back of the grill; used same bolt as upper mount, put in nutsert to eliminate the nut / washer on the backside. You can also see lower bracket in these pictures:
Put nutsert in for lower bracket on drivers side as well. You can see upper and lower drivers side brackets in this picture.
Condensor is mounted pretty rigidly:
Making more brackets. Worked yesterday, but was able to get some car time after dinner. Made a drier bracket, made the two bottom brackets for the condenser. Eliminated the nut for the upper bracket and replaced it with a nutsert into the radiator support. Added nutserts for the bottom brackets to bolt to. Next will be brackets for the oil cooler.
Drier bracket:
Lower bracket on passenger side, put nutsert into frame end cap:
Drier mounted, has a little bit of clearance between it and the back of the grill; used same bolt as upper mount, put in nutsert to eliminate the nut / washer on the backside. You can also see lower bracket in these pictures:
Put nutsert in for lower bracket on drivers side as well. You can see upper and lower drivers side brackets in this picture.
Condensor is mounted pretty rigidly: