Carbon tracking through rotor. More HEI woes.

Testing on the 340 was delayed by a bunch of other projects.
Here is what we found this past weekend:
Average gap between rotor tip and button in the cap was .120". We extended the brass rotor tab and now have an average gap of .030".

Drilled a hole in another cap and checked rotor phasing with a timing light. Basically, the phasing is way off. The rotor is pointing at plastic, not the cap button. We are looking for a reluctor that has the proper phasing. Ehrenberg sells them on Ebay sometimes. Or I may have this one machined with a new keyway.

Got to get back to the other projects, so another progress report will be a few weeks away. Thanks, again FABO members.