ProComp/Speedmaster aluminum heads

yellow rose said

Is your stuff up and running yet? Word is it’s raining it’s guts out over there. I can smell the rain is coming my way right now.

Click to expand...

Yes it's raining like crazy. But that's fine. The last three days I wanted to do something when I came home from work but it was hot out and I knew I had Sunday through Wednesday off. And it was going to be cool so I've got the next few days to start clicking things together... Again it's just sitting in there on the mount pads for the engine and a couple of the transmission crossmember bolts holding the transmission up.
I'll start underneath tomorrow, Driveline tranny crossmember shift linkage motor mounts zbar starter...
I might have to shift the motor a little towards the driver side to get the header off the passenger side torsion bar. I need to put the gaskets in and tighten down the headers those are just dangling by a couple bolts on each side to keep them in place. Then the big question mark if the exhaust will fit to the headers. they're both cheap Summit headers but they may have changed manufacturers since 5 years ago and of course these are the ceramic coated ones. So far buy eye ball they look close but we'll see...