67/68/69 cuda dilemma
Well today was welding day. Got that transition pan and the outboard rear lap belt mounts welded in. Started grinding it all down. Was 100° out there I quit around 3:30pm. Got about 1/3 of it ground down. Removing the framerails from this transition pan to reuse the pan I used 3/8" drill bits. Of course that left some big *** holes to rosette weld. That in turn leaves a lot of weld to grind down. Anyhoo, it doesnt look super great up top since I kept having to work the metal down to fit tight at the framerails in the seat pan area, but the welds are solid and that's an area nobody sees anyways. I will work at getting the rest of the welds ground down and the floor pan sanded on the top side to prep it for primer.
Well today was welding day. Got that transition pan and the outboard rear lap belt mounts welded in. Started grinding it all down. Was 100° out there I quit around 3:30pm. Got about 1/3 of it ground down. Removing the framerails from this transition pan to reuse the pan I used 3/8" drill bits. Of course that left some big *** holes to rosette weld. That in turn leaves a lot of weld to grind down. Anyhoo, it doesnt look super great up top since I kept having to work the metal down to fit tight at the framerails in the seat pan area, but the welds are solid and that's an area nobody sees anyways. I will work at getting the rest of the welds ground down and the floor pan sanded on the top side to prep it for primer.