Just got done for the day..
Started with an idea I came up with to make the passenger side exhaust fit a little better.. motor mount nuts and chain.. ran a heavy wire to an open connection I had under the dash left over from the nitrous.. I'll run a relay for the fan and have it operate off of a temperature sensor it's also connected to a switch in my dash. Likely I'll just switch the fan off if I quickly want to use the nitrous. I don't think I would overload the circuit but I wouldn't want to take a chance either.. I think the engine would survive 12 seconds without the fan if needed LOL... Reconnected the first gear trigger I have on the transmission for the two step. Something I connected up a long time ago so the two step only works in first gear... Got the carpet laid back down over the shifter and all that screwed back in and the fire extinguisher and stuff. I went ahead and put the intake manifold on or at least the lower part. It was scary because it went on way too easy? I felt like I did something wrong it was too easy.. cleaned up the valve covers and got those back on with new gaskets and started lining up the new pulleys...
View attachment 1715542887 View attachment 1715542888