225 slant 6 Port fuel injection
What manifold did you find? MPFI can be done with ANY intake manifold if you put the injector bungs in the head right through the water jacket, into roof of the intake port. Just drill them out .750 with a hole saw and epoxy .750 OD injector bungs into them making sure the epoxy seals the top and bottom seams. run a TB off the carb flange and your set. Use a Caddy/Buick/Olds Northstar Stainless fuel rail and cut/weld it to make it a straight 6, the spacing is perfect.
What manifold did you find? MPFI can be done with ANY intake manifold if you put the injector bungs in the head right through the water jacket, into roof of the intake port. Just drill them out .750 with a hole saw and epoxy .750 OD injector bungs into them making sure the epoxy seals the top and bottom seams. run a TB off the carb flange and your set. Use a Caddy/Buick/Olds Northstar Stainless fuel rail and cut/weld it to make it a straight 6, the spacing is perfect.
