Dad’s 1969 Dodge Dart Swinger 340
So today was fun. Worked on the clutch linkage. Had to do a little massaging of the pedal side as I couldn’t get the spring clip on. Once on, I got the bottom rod in.
Worked on the wiring as well. Mounted the voltage regulator, ignition ballast, and ignition module. Test fit the alternator and got measurements for the spacers. I took the half finished engine harness over so I could trim wires to size.
Tomorrow I expect I will finish the engine harness and move on to battery cables If the fuse block shows up I can pretty much finish out the wiring. Good times!!
So today was fun. Worked on the clutch linkage. Had to do a little massaging of the pedal side as I couldn’t get the spring clip on. Once on, I got the bottom rod in.
Worked on the wiring as well. Mounted the voltage regulator, ignition ballast, and ignition module. Test fit the alternator and got measurements for the spacers. I took the half finished engine harness over so I could trim wires to size.
Tomorrow I expect I will finish the engine harness and move on to battery cables If the fuse block shows up I can pretty much finish out the wiring. Good times!!
