Crane Roller Lifters OH NO!

Mopar Sam said
I will have Brian post some pictures when he gets time. We are both pretty busy right now.

This is the 3rd cam in 7 years. The first was an unknown used hyd flat with only .460 lift, It was fine but slow, he upgraded to the comp 284XE and had 2-3 years and had 1 lifter collapse, and a couple more were on their way.

We were just talking about maybe refreshing the motor this winter, at least touching up the valve job and checking things out. We will just do it sooner than later.

One thing for sure, he will not use a hyd flat.

That’s the beauty of a SFT. It’s much more forgiving if there is something off.

You already have the roller lifters. And those are among the very best lifters out there not made by Jesel. I’d see what I could find that’s off and look at a remedy for what you find.

I was going to use a mushroom lifter on my next build but finding lifters is like finding the pot of gold at the end of a rainbow. So I’ll use a solid roller. And then see if I can make .750 net lift, maybe a bit more.