Replacing a crank shaft questions

like_A_pike said

If it is internally balanced then this https://www.jegs.com/i/Scat/942/1-98003BI/10002/-1 ?

plus a new harmonic balancer?

Click to expand...

Ok, remind me WHY your crank is junk.

There are still stone aged dullards who think grinding a crank .010 under is bad, and anything more junks the crank. They are fools.

I usually grind my brand new small block cranks to 2.100 and use chevy rods. That means I take a brand new crank and take it .025 under.

The last low deck BB I did had giant, worthless 2.375 rod journals. I did some figuring and turned that crank down to 2.100 so I could use SBC rod bearings and to slow the bearing speed down some. That means I had it ground .275 UNDER.

I’d do more to see why they won’t use that crank long before I bought another crank.