Need New Headers for my ride.
11 Customer Reviews for Hedman Hedders 78500 - Hedman Tight Tubes Street Rod Headers
Average Customer Review
5 Star
(6)
4 Star
(2)
3 Star
(1)
2 Star
(0)
1 Star
(2)
Results 1 - 10 of 11
Sort by Most HelpfulSort by NewestReview This Product
Half of it works
Summit Racing Verified Purchase
HED-78500
I ordered this to go on my 1972 Plymouth satellite 318 5.2L. With the oil relocation kit I installed, this product I thought would be perfect. Turns out that only one of the manifolds fit which was the one that all the pipes went straight down (not the one with the pipe that crosses over). For some reason that one wouldn't fit. The bottom end ...read more
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: LEVI from NE
Date: April 04, 2016
Appearance
Ease of Installation
Price/Value
Quality
Hedman Tight Tubes SB Mopar
Summit Racing Verified Purchase
HED-78500
Excellent fit on a '77 Aspen (F-Body) R/T w/ power steering. You have to use a mini-starter. Just ordered another set for an '80 Mirada.
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: PAUL from WA
Date: February 28, 2015
Appearance
Ease of Installation
Price/Value
Quality
Tight tubes review
Summit Racing Verified Purchase
HED-78500
Great headers from Hedman, I tried a pair of larger headers from Summits main competitor, those headers were not even close to fitting. These Hedman Headers from Summit fit perfectly and installed fairly easily.
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: SCOTT from NM
Date: October 28, 2014
Appearance
Ease of Installation
Price/Value
Quality
hedman tight tubes headers
Summit Racing Verified Purchase
HED-78500
went on easy enough towed to the exhaust shop and was told there is no way he could hook exhaust to these headers due to interference with idler arm and torsion bar on passenger side starter on the driver side even with the mini starter I bought from summit description said they would fit on Plymouth duster they would not sent them back to ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: TOM from CA
Date: May 20, 2020
Appearance
Ease of Installation
Price/Value
Quality
A definite must have.
Summit Racing Verified Purchase
HED-78500
Went on excellent. Now I am using truck mounts. The rubber is thicker and sit a little higher than the ones for a 73 dart 340. I have a 360. It does have the car stands, but I tried a different set of headers before I got these. That is why I put the truck mounts on. I believe that these would still work with the car mounts. I was just too la ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: DANIEL from AR
Date: April 22, 2020
Appearance
Ease of Installation
Price/Value
Quality
Mopar headers
Summit Racing Verified Purchase
HED-78500
Great fit on my 67 dodge dart with power steering!
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: CHRISTOPHE from NV
Date: December 16, 2019
Appearance
Ease of Installation
Price/Value
Quality
Very DisAppointed! Does not Fit Edelbrock Heads!
Summit Racing Verified Purchase
HED-78500
The left side header hits the bottom edge of the cylinder head. You would have to either space the header away from the block @ 1/2" or cut the bottom boss of the head to make clearance. Either way not good.
Was this review helpful? Yes | No
report abuse
Reviewer: MICHAEL from NJ
Date: August 10, 2019
Appearance
Ease of Installation
Price/Value
Quality
Hedman Headers
Summit Racing Verified Purchase
HED-78500
Great product, seem better built then as discribed.
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: ADAM from FL
Date: March 08, 2018
Appearance
Price/Value
Quality
Nice quality for the price,
Summit Racing Verified Purchase
HED-78500
Nice quality....maybe jet coating would look nicer...the finish will fade as all tube headers seem to. But they sound and flow quite nice! They fit and finish is very good. if your using them on a Magnum block you may need to grind a bit on the block for a tight fit...other then that have 15k on mine and only tightened the bolts on the flang ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: PATRICK from TN
Date: January 08, 2018
Appearance
Ease of Installation
Price/Value
Quality
They Fit!
Summit Racing Verified Purchase
HED-78500
3rd set of headers I have tried on my Mopar 360 engine swap into a 66 Rambler American. These are the only headers that clear the steering shaft. These are different than other block huggers because the pipes don't overlap, so they are less than 3 inches from mounting point on the heads. Actually the drivers side header tube sticks out less ...read more
Was this review helpful? Yes | No
report abuse
Reviewer: TODD from OH
Date: June 29, 2017
Appearance
Ease of Installation
Price/Value
Quality
11 Customer Reviews for Hedman Hedders 78500 - Hedman Tight Tubes Street Rod Headers
Average Customer Review
5 Star
(6)
4 Star
(2)
3 Star
(1)
2 Star
(0)
1 Star
(2)
Results 1 - 10 of 11
Sort by Most HelpfulSort by NewestReview This Product
Half of it works
HED-78500
I ordered this to go on my 1972 Plymouth satellite 318 5.2L. With the oil relocation kit I installed, this product I thought would be perfect. Turns out that only one of the manifolds fit which was the one that all the pipes went straight down (not the one with the pipe that crosses over). For some reason that one wouldn't fit. The bottom end ...read more
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: LEVI from NE
Date: April 04, 2016
Appearance
Ease of Installation
Price/Value
Quality
Hedman Tight Tubes SB Mopar
HED-78500
Excellent fit on a '77 Aspen (F-Body) R/T w/ power steering. You have to use a mini-starter. Just ordered another set for an '80 Mirada.
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: PAUL from WA
Date: February 28, 2015
Appearance
Ease of Installation
Price/Value
Quality
Tight tubes review
HED-78500
Great headers from Hedman, I tried a pair of larger headers from Summits main competitor, those headers were not even close to fitting. These Hedman Headers from Summit fit perfectly and installed fairly easily.
1 of 1 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: SCOTT from NM
Date: October 28, 2014
Appearance
Ease of Installation
Price/Value
Quality
hedman tight tubes headers
HED-78500
went on easy enough towed to the exhaust shop and was told there is no way he could hook exhaust to these headers due to interference with idler arm and torsion bar on passenger side starter on the driver side even with the mini starter I bought from summit description said they would fit on Plymouth duster they would not sent them back to ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: TOM from CA
Date: May 20, 2020
Appearance
Ease of Installation
Price/Value
Quality
A definite must have.
HED-78500
Went on excellent. Now I am using truck mounts. The rubber is thicker and sit a little higher than the ones for a 73 dart 340. I have a 360. It does have the car stands, but I tried a different set of headers before I got these. That is why I put the truck mounts on. I believe that these would still work with the car mounts. I was just too la ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: DANIEL from AR
Date: April 22, 2020
Appearance
Ease of Installation
Price/Value
Quality
Mopar headers
HED-78500
Great fit on my 67 dodge dart with power steering!
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: CHRISTOPHE from NV
Date: December 16, 2019
Appearance
Ease of Installation
Price/Value
Quality
Very DisAppointed! Does not Fit Edelbrock Heads!
Summit Racing Verified PurchaseHED-78500
The left side header hits the bottom edge of the cylinder head. You would have to either space the header away from the block @ 1/2" or cut the bottom boss of the head to make clearance. Either way not good.
Was this review helpful? Yes | No
report abuse
Reviewer: MICHAEL from NJ
Date: August 10, 2019
Appearance
Ease of Installation
Price/Value
Quality
Hedman Headers
Summit Racing Verified PurchaseHED-78500
Great product, seem better built then as discribed.
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: ADAM from FL
Date: March 08, 2018
Appearance
Price/Value
Quality
Nice quality for the price,
Summit Racing Verified PurchaseHED-78500
Nice quality....maybe jet coating would look nicer...the finish will fade as all tube headers seem to. But they sound and flow quite nice! They fit and finish is very good. if your using them on a Magnum block you may need to grind a bit on the block for a tight fit...other then that have 15k on mine and only tightened the bolts on the flang ...read more
0 of 0 found this review helpful.
Was this review helpful? Yes | No
report abuse
Reviewer: PATRICK from TN
Date: January 08, 2018
Appearance
Ease of Installation
Price/Value
Quality
They Fit!
Summit Racing Verified PurchaseHED-78500
3rd set of headers I have tried on my Mopar 360 engine swap into a 66 Rambler American. These are the only headers that clear the steering shaft. These are different than other block huggers because the pipes don't overlap, so they are less than 3 inches from mounting point on the heads. Actually the drivers side header tube sticks out less ...read more
Was this review helpful? Yes | No
report abuse
Reviewer: TODD from OH
Date: June 29, 2017
Appearance
Ease of Installation
Price/Value
Quality
