Of course on my V8 I want to mount it in the power steering area. All of the aftermarket stuff I see wants to put it in the original spot for AC up on top of the motor which definitely will not satisfy me... My idea as of now is to get those brackets and bolt them to the compressor and get the power steering brackets without the pump and mount those to the engine. Then in some fashion weld the two together to make one. Tack them into place down on the engine and then weld them up grind them and paint them... I'm really looking forward to having it down low and out of the way. Again making it able to pop the belt off the front of the pulley when I don't need it.. having both the lines going straight out the fender wall on the driver side and tucked up out of the way and un-noticed...
