Spring perch bushings

pa340dart said

I had to remove the spring eye bolts on the fronts. These bolts were installed from the outside, this allowed the bold threads to extend into the frame. Mine were impossible to drop right out.
If the nuts are on the outside > easy will drop out
I posted my hassle in a thread just last week on here. Have fun

Click to expand...

If the nuts are on the outside the bolt is against the framerail side with about 1/8" clearance to the frame. It's not gonna go anywhere once the nut is off unless your framerails have access holes in them for the bolt. I never seen an A body with those. If the nuts are on the framerail side the bolt is too long and will hit the back side of the rocker before you can get it out. Remove the 4 nuts on each perch then pry them out of the frame. Once the perches are lowered down then you can get those fwd spring eye bolts out.